Specific use of iron powder briquetting binder:
Add the binder to the material and stir it evenly through a mixer (wheel mill, double-shaft mixer, etc.). The amount of binder added is about 2%. The amount of binder added is adjusted according to the particle size of the material.
Add an appropriate amount of water according to the material situation, and pay attention to controlling the humidity. The more water the better for the binder, but for the briquetting process, too much water is easy to stick to the wheel, and too much water is easy to reduce the pressure of the briquetting machine.
Stir evenly again, and then it can be transported to the briquetting machine to make balls.
Dry or air the finished balls according to requirements.
Through the above steps, the briquetting process is completed. The key points of the briquetting rate are: the amount of water added and the mixing uniformity.
Henan Jinhan Environmental Protection Technology Co., Ltd. produces various mineral powder binders for briquetting materials such as steel plant sludge, steel slag powder, oxide skin, phosphate rock powder, fluorite balls, etc. After years of market testing, it has played a significant cost-reduction role in various industries.
The quality of the pellets is mainly related to the raw materials, the amount of adhesive added, the uniformity of mixing, and the pressure of the pellet press. Each link is closely linked. To produce pellets that satisfy users, it is necessary to combine local material conditions and user requirements, and then adjust the adhesive according to the requirements.